期刊名:Fibers
期刊主页:https://www.mdpi.com/journal/fibers
纤维增强混凝土、超高性能水泥基复合材料与 FRP 增强体系是土木工程新型材料与既有结构加固的研究热点。本专题汇集发表于 Fibers 的相关研究,探究多类纤维及纳米改性水泥基材料的力学、耐久与服役性能,结合试验与多种数值模拟方法,分析 FRP 构件增强效应,揭示疲劳、火灾工况下界面与裂缝损伤机理,覆盖混凝土梁加固、火灾受损构件修复、建筑遗产保护,并开展技术经济分析,为纤维复合材料工程应用提供理论与试验参考。
1. Effective Flexural Strengthening of Reinforced Concrete T-Beams Using Bonded Fiber-Core Steel Wire Ropes
采用粘贴纤维芯钢丝绳对钢筋混凝土T形梁进行有效抗弯加固
https://www.mdpi.com/2079-6439/13/5/53
Atmajayanti, A.T.; Haryanto, Y.; Hsiao, F.-P.; Hu, H.-T.; Nugroho, L. Effective Flexural Strengthening of Reinforced Concrete T-Beams Using Bonded Fiber-Core Steel Wire Ropes. Fibers 2025, 13, 53.
2. Multi-Scale Toughening of UHPC: Synergistic Effects of Carbon Microfibers and Nanotubes
超高性能混凝土的多尺度增韧:碳微纤维与纳米管的协同效应
https://www.mdpi.com/2079-6439/13/4/49
Martínez, J.D.R.; Ríos, J.D.; Cifuentes, H.; Leiva, C. Multi-Scale Toughening of UHPC: Synergistic Effects of Carbon Microfibers and Nanotubes. Fibers 2025, 13, 49.
3. Chopped Basalt Fibers Reinforced Mortar for Strengthening the Architectural Heritage
短切玄武岩纤维增强砂浆用于加固建筑遗产
https://www.mdpi.com/2079-6439/13/2/20
Mercuri, M.; Vailati, M.; Gregori, A. Chopped Basalt Fibers Reinforced Mortar for Strengthening the Architectural Heritage. Fibers 2025, 13, 20.
4. Influence of Coated Steel Fibers on Mechanical Properties of UHPC Considering Graphene Oxide, Nano-Aluminum Oxide, and Nano-Calcium Carbonate
考虑氧化石墨烯、纳米氧化铝和纳米碳酸钙的涂层钢纤维对超高性能混凝土力学性能的影响
https://www.mdpi.com/2079-6439/13/4/37
Mousavi, S.S.; Ahmadi, K.; Dehestani, M.; Yeon, J.H. Influence of Coated Steel Fibers on Mechanical Properties of UHPC Considering Graphene Oxide, Nano-Aluminum Oxide, and Nano-Calcium Carbonate. Fibers 2025, 13, 37.
5. Investigation of the Effect of GFRP Reinforcement Bars on the Flexural Strength of Reinforced Concrete Beams Using the Finite Element Method
采用有限元法研究GFRP增强筋对钢筋混凝土梁抗弯强度的影响
https://www.mdpi.com/2079-6439/13/9/125
Sümer, Y.; Öztemel, M. Investigation of the Effect of GFRP Reinforcement Bars on the Flexural Strength of Reinforced Concrete Beams Using the Finite Element Method. Fibers 2025, 13, 125.
6. Synergistic Use of Nanosilica and Basalt Fibers on Mechanical Properties of Internally Cured Concrete with SAP: An Experimental Analysis and Optimization via Response Surface Methodology
纳米二氧化硅与玄武岩纤维对掺SAP内养护混凝土力学性能的协同作用:基于响应面法的试验分析与优化
https://www.mdpi.com/2079-6439/13/3/25
Borito, S.M.; Zhu, H.; Ibrahim, Y.E.; Haruna, S.I.; Bo, Z. Synergistic Use of Nanosilica and Basalt Fibers on Mechanical Properties of Internally Cured Concrete with SAP: An Experimental Analysis and Optimization via Response Surface Methodology. Fibers 2025, 13, 25.
7. Durability, Service Life, and Techno-Economic Analysis of Non-Proprietary UHPC
非专有超高性能混凝土(UHPC)的耐久性、使用寿命与技术经济分析
https://www.mdpi.com/2079-6439/13/2/22
Rai, B.; Wille, K. Durability, Service Life, and Techno-Economic Analysis of Non-Proprietary UHPC. Fibers 2025, 13, 22.
8. Strengthening Fire-Damaged Lightweight Concrete T-Beams Using Engineered Cementitious Composite with Basalt Fiber-Reinforced Polymer Grid
采用玄武岩纤维增强聚合物格栅与工程水泥基复合材料加固火灾损伤轻质混凝土T形梁
https://www.mdpi.com/2079-6439/13/1/7
Al-Baghdadi, H.M.; Kadhum, M.M. Strengthening Fire-Damaged Lightweight Concrete T-Beams Using Engineered Cementitious Composite with Basalt Fiber-Reinforced Polymer Grid. Fibers 2025, 13, 7.
9. Insights on Lattice Discrete Particle Model Calibration and Validation Procedure to Simulate Polypropylene and Steel Fibre-Reinforced Concrete
关于模拟聚丙烯与钢纤维增强混凝土的格构离散粒子模型标定与验证方法的见解
https://www.mdpi.com/2079-6439/13/2/16
Poudel, S.; Cibelli, A.; Del Prete, C.; Wan-Wendner, R.; Mazzotti, C.; Buratti, N. Insights on Lattice Discrete Particle Model Calibration and Validation Procedure to Simulate Polypropylene and Steel Fibre-Reinforced Concrete. Fibers 2025, 13, 16.
10. Experimental Investigation on the Frost Resistance and Service Life Prediction of Basalt Fiber-Reinforced Concrete
玄武岩纤维增强混凝土抗冻性试验研究与使用寿命预测
https://www.mdpi.com/2079-6439/13/10/143
Zhao, C.; Jiang, G.; Guo, J.; Zhang, X.; Ma, Z.; Zhuang, C.; Zhang, W.; Yu, S. Experimental Investigation on the Frost Resistance and Service Life Prediction of Basalt Fiber-Reinforced Concrete. Fibers 2025, 13, 143.
11. Degradation of Interfacial Bond for FRPs Near-Surface Mounted to Concrete Under Fatigue: An Analytical Approach
疲劳荷载下近表面嵌贴FRP与混凝土界面黏结的退化:一种解析方法
https://www.mdpi.com/2079-6439/13/1/9
Wang, X.; Cheng, L. Degradation of Interfacial Bond for FRPs Near-Surface Mounted to Concrete Under Fatigue: An Analytical Approach. Fibers 2025, 13, 9.
12. Effect of GFRP and CFPR Hybrid Confinement on the Compressive Performance of Concrete
GFRP与CFRP混杂约束对混凝土受压性能的影响
https://www.mdpi.com/2079-6439/13/2/12
Moretti, M.L. Effect of GFRP and CFPR Hybrid Confinement on the Compressive Performance of Concrete. Fibers 2025, 13, 12.
13. Verification of Crack Width Evaluation in Fiber-Reinforced Cementitious Composite Reinforced with Various Types of Fiber-Reinforced Polymer Bars
不同类型纤维增强聚合物筋增强纤维水泥基复合材料裂缝宽度评估的验证
https://www.mdpi.com/2079-6439/13/5/60
Sasaki, H.; Shiferaw, H.N.; Kanakubo, T. Verification of Crack Width Evaluation in Fiber-Reinforced Cementitious Composite Reinforced with Various Types of Fiber-Reinforced Polymer Bars. Fibers 2025, 13, 60.
14. Mechanical Properties and Structural Design of PVA Fiber-Reinforced Cementitious Composites with Fly Ash Replacement for Natural Sand Aggregates
粉煤灰替代天然砂骨料的PVA纤维增强水泥基复合材料力学性能与结构设计
https://www.mdpi.com/2079-6439/13/6/72
Negrutiu, C.M.; Sosa, P.I.; Campian, C.M.; Pop, M.I. Mechanical Properties and Structural Design of PVA Fiber-Reinforced Cementitious Composites with Fly Ash Replacement for Natural Sand Aggregates. Fibers 2025, 13, 72.
15. The Effects of Polypropylene Fibres on the Shear Behaviour of a Concrete Crack: An Experimental Study
聚丙烯纤维对混凝土裂缝剪切行为影响的试验研究
https://www.mdpi.com/2079-6439/13/7/96
Ortiz-Navas, F.; Navarro-Gregori, J.; Serna, P. The Effects of Polypropylene Fibres on the Shear Behaviour of a Concrete Crack: An Experimental Study. Fibers 2025, 13, 96.
期刊介绍
Fibers (ISSN 2079-6439) 是一个国际型开放获取英文学术期刊,刊载关于纤维材料科学及纤维领域所有实证与理论研究的原创论文和权威综述,旨在为跨学科的纤维研究提供交流平台。
期刊主编

Prof. Dr. Martin J. D. Clift
Swansea University Medical School (SUMS), Swansea, UK
|
2025 Impact Factor
|
4.2
|
|
2025 CiteScore
|
7.3
|
|
Time to First Decision
|
19.7 Days
|
|
Acceptance to Publication
|
4.7 Days
|
特别声明:本文转载仅仅是出于传播信息的需要,并不意味着代表本网站观点或证实其内容的真实性;如其他媒体、网站或个人从本网站转载使用,须保留本网站注明的“来源”,并自负版权等法律责任;作者如果不希望被转载或者联系转载稿费等事宜,请与我们接洽。