期刊名：Materials

期刊主页：https://www.mdpi.com/journal/materials

铝合金凭借其轻质、高强、耐腐蚀、易加工等卓越性能，正日益成为航空航天、汽车制造、轨道交通及新能源装备等领域的关键结构材料。随着对高强铝合金设计、先进成形与焊接技术以及服役性能与疲劳失效机制的深入研究，铝合金材料的创新正在不断拓展其工程应用的边界。本清单精选中南大学学者在铝合金领域的最新研究成果，旨在展现前沿动态，助力轻量化与高性能结构材料的创新发展。

论文1

通过总锌镁含量与多向锻造工艺调控Al-Zn-Mg-Cu合金的强度与耐腐蚀性能

Tailoring Strength and Corrosion Resistance in Al-Zn-Mg-Cu Alloys by Total (Zn plus Mg) Content and Multi-Directional Forging Process

Lin, J.; Liu, T.; Wu, M.; Yuan, S.; Li, Z.; Huang, Y.; Yin, X.; Huang, L.; Liu, W.; Xiao, D. Tailoring Strength and Corrosion Resistance in Al–Zn–Mg–Cu Alloys by Total (Zn + Mg) Content and Multi-Directional Forging Process.

Materials 2025, 18, 4476. https://doi.org/10.3390/ma18194476

论文2

挤压加工与热处理协同提升Al-10Ce-3Mg-5Zn耐热合金强度

Enhanced Strength of Al-10Ce-3Mg-5Zn Heat-Resistant Alloy by Combining Extrusion and Heat Treatment

Zhang, H.; Li, Z.; Xiao, D.; Wu, M.; Huang, Y.; Liu, W. Enhanced Strength of Al-10Ce-3Mg-5Zn Heat-Resistant Alloy by Combining Extrusion and Heat Treatment.

Materials 2025, 18, 1706. https://doi.org/10.3390/ma18081706

论文3

短流程热机械处理中变形程度对Al-10.0Zn-2.7Mg-2.3Cu合金组织性能演变的影响

Influence of the Deformation Degree on the Evolution of the Microstructure and Properties of Al-10.0Zn-2.7Mg-2.3Cu Alloy During Short-Flow Thermo-Mechanical Treatment

Li, H.; Zhao, Y.; Huang, Y.; Liu, Y.; Cheng, J. Influence of the Deformation Degree on the Evolution of the Microstructure and Properties of Al-10.0Zn-2.7Mg-2.3Cu Alloy During Short-Flow Thermo-Mechanical Treatment.

Materials 2025, 18, 554. https://doi.org/10.3390/ma18030554

论文4

基于势函数的Al-Cu-Li合金分子动力学模拟与实验验证

Potential Function-Based Molecular Dynamics Simulation of Al-Cu-Li Alloys and Comparison with Experiments

Chen, F.; Wang, H.; Liu, Y.; Qi, L.; Zeng, Q. Potential Function-Based Molecular Dynamics Simulation of Al-Cu-Li Alloys and Comparison with Experiments.

Materials 2025, 18, 2420. https://doi.org/10.3390/ma18112420

论文5

微量钇添加对Al-5.6Zn-2.5Mg-1.6Cu-0.2Cr合金组织、力学性能及腐蚀行为的影响

Yao, T.; Xiao, D.; Yan, Y.; Liu, W. Microstructure, Mechanical Properties, and Corrosion Behavior in Al-5.6Zn-2.5Mg-1.6Cu-0.2Cr Alloy with Minor Yttrium Addition.

Materials 2025, 18, 875. https://doi.org/10.3390/ma18040875

论文6

预变形对Al-Mg-Zn合金腐蚀疲劳裂纹扩展的影响机制

Effects of Pre-Deformation in Corrosion Fatigue Crack Growth of Al-Mg-Zn Alloy

Jiang, H.; Jin, J.; Fang, Y.; Gou, G.; Lu, W.; Zhang, Z.; Zhou, H.; Sun, H.; Feng, J.; Chen, J.; et al. Effects of Pre-Deformation in Corrosion Fatigue Crack Growth of Al-Mg-Zn Alloy.

Materials 2025, 18, 365. https://doi.org/10.3390/ma18020365

论文7

Zr与Y元素对T6态Al-Si-Mg合金腐蚀行为的协同作用

The Effect of Zr and Y on the Corrosion Behavior of T6-Treated Al-Si-Mg Alloys

Ye, P.; Wu, F.; Jiang, F. The Effect of Zr and Y on the Corrosion Behavior of T6-Treated Al–Si–Mg Alloys.

Materials 2025, 18, 2705. https://doi.org/10.3390/ma18122705

论文8

基于末端淬火与分级淬火技术的新型高强铝合金淬火敏感性研究

Quenching Sensitivity Study of New High-Strength Aluminum Alloys Based on an Immersion End-Quenching and Step-Quenching Technique

Li, C.; Chen, Q.; Qin, Y.; Cao, P.; Lin, S.; Lan, D.; Huang, W.; Zhou, W.; Chen, W. Quenching Sensitivity Study of New High-Strength Aluminum Alloys Based on an Immersion End-Quenching and Step-Quenching Technique.

Materials 2025, 18, 3132. https://doi.org/10.3390/ma18133132

论文9

磁控溅射铝合金基体Ag-In-Cu薄膜的光学特性与热稳定性

Optical Properties and Thermal Stability of Ag-In-Cu Film on Aluminum Alloy Substrate Deposited by Magnetron Sputtering

Zhao, X.; Wang, X.; Liu, K.; Jiang, Y.; Peng, Z.; Zhou, Y.; Qian, Z.; Li, W.; Lu, L.; Xiao, L.; et al. Optical Properties and Thermal Stability of Ag-In-Cu Film on Aluminum Alloy Substrate Deposited by Magnetron Sputtering.

Materials 2025, 18, 1318. https://doi.org/10.3390/ma18061318

论文10

二次时效工艺对AA7150铝合金力学性能与组织的影响

Effect of Secondary Aging Conditions on Mechanical Properties and Microstructure of AA7150 Aluminum Alloy

Chen, F.; Wang, H.; Jiang, Y.; Liu, Y.; Zhou, Q.; Zeng, Q. Effect of Secondary Aging Conditions on Mechanical Properties and Microstructure of AA7150 Aluminum Alloy.

Materials 2025, 18, 4763. https://doi.org/10.3390/ma18204763

论文11

转速增量法检测航空铝合金残余应力时转速精度的影响研究

Influence of Rotational Speed on Accuracy in Measuring MIRS of Aerospace Aluminum Alloy by Incremental Hole-Milling Method

Shen, J.; He, H.; Li, C.; Yi, Y.; Huang, S. Influence of Rotational Speed on Accuracy in Measuring MIRS of Aerospace Aluminum Alloy by Incremental Hole-Milling Method.

Materials 2025, 18, 1582. https://doi.org/10.3390/ma18071582

论文12

铈盐-沸石复合硅烷膜对7N01铝合金环氧涂层耐腐蚀性能的增强作用

Effect of Cerium Salt and Zeolite Particle-Doped Silane Film on Corrosion Resistance of Epoxy Coating on 7N01 Aluminum Alloy

Sun, L.; Peng, S.; Wang, H.; Lv, X.; Tang, J.; Chen, M.-A. Effect of Cerium Salt and Zeolite Particle-Doped Silane Film on Corrosion Resistance of Epoxy Coating on 7N01 Aluminum Alloy.

Materials 2025, 18, 4026. https://doi.org/10.3390/ma18174026

Materials 期刊介绍

主编：Maryam Tabrizian, McGill University, Canada

主要关注材料科学与工程研究相关各个领域的最新研究成果，包括但不限于高分子、纳米材料、能源材料、复合材料、碳材料、多孔材料、生物材料、建筑材料、陶瓷、金属等，以及材料物理化学、催化、腐蚀、光电应用、结构分析和表征、建模等。

*JCR Q2 at “PHYSICS, APPLIED” and “METALLURGY & METALLURGICAL ENGINEERING” Categories

*Scopus Q1 at “Condensed Matter Physics” Category