期刊名：Fluids

期刊主页：https://www.mdpi.com/journal/fluids

Editor’s Choice文章由期刊编辑从近期发表的论文中遴选而出，入选文章均为学术编辑认为对读者具有特别吸引力、或在相应研究领域具有重要意义的工作，旨在集中呈现期刊各研究方向上最具代表性的成果。本次为您推荐2025年的精选文章，共22篇，涵盖计算流体力学与数值方法、多相流与界面动力学、人工智能与数据驱动流体力学、工业和环境与生物流体力学、涡动力学与流动稳定性、能源工程与热物理流体力学、经典流体力学与基础理论等热点方向。期刊所有文章均为开放获取，您可以免费且无限制地阅读全部出版内容。

计算流体力学与数值方法：

1. Spectral Analysis of Confined Cylinder Wakes

受限圆柱尾迹的频谱分析

https://doi.org/10.3390/fluids10040084

2. A Review of Mesh Adaptation Technology Applied to Computational Fluid Dynamics

计算流体力学中的网格自适应技术

https://doi.org/10.3390/fluids10050129

3. Tuned Generalised k-ω (GEKO) Turbulence Model Parameters for Predicting Transitional Flow Through Stenosis Geometries of Various Degrees

用于预测不同程度狭窄几何结构中过渡流的调谐广义 k-ω (GEKO) 湍流模型参数研究

https://doi.org/10.3390/fluids10070168

4. Requirement for Higher-Order Viscous Discretization to Avoid Numerical Contamination of Subgrid-Scale Model-Constant Estimates in a Linearly Forced Taylor-Flow Benchmark

线性受迫泰勒流动基准下避免亚网格尺度模型常数数值污染的高阶粘性离散要求

https://doi.org/10.3390/fluids11010005

多相流与界面动力学：

Computational Study of a Utility-Scale Vertical-Axis MHK Turbine: A Coupled Approach for Flow–Sediment–Actuator Modeling

大型立轴海洋动能水轮机计算研究：流动-泥沙-作动器的耦合建模方法

https://doi.org/10.3390/fluids10120304

人工智能与数据驱动流体力学：

1. Machine Learning Model for Gas–Liquid Interface Reconstruction in CFD Numerical Simulations

基于机器学习的计算流体力学气液界面重构模型

https://doi.org/10.3390/fluids10010020

2. Rapid CFD Prediction Based on Machine Learning Surrogate Model in Built Environment: A Review

建筑环境中基于机器学习代理模型的 CFD 快速预测研究综述

https://www.mdpi.com/2311-5521/10/8/193

3. Cavitation–Velocity Correlation in Cavitating Flows Around a Clark-Y Hydrofoil Using a Data-Driven U-Net

基于数据驱动 U-Net 网络绕 Clark-Y 水翼空化流中空化与速度关联性研究

https://doi.org/10.3390/fluids10080213

工业和环境与生物流体力学：

1. Literature Review on Single and Twin-Screw Extruders Design for Polymerization Using CFD Simulation

基于 CFD 模拟的聚合反应的单螺杆与双螺杆挤出机设计的研究综述

https://doi.org/10.3390/fluids10010009

2. The Lattice Boltzmann Method with Deformable Boundary for Colonic Flow Due to Segmental Circular Contractions

基于可变形边界晶格玻尔兹曼方法的节段性环形收缩驱动结肠流场研究

https://doi.org/10.3390/fluids10020022

3. The Impact of Polydimethylsiloxane (PDMS) in Engineering: Recent Advances and Applications

聚二甲基硅氧烷 (PDMS) 在工程领域的影响：最新进展与应用

https://doi.org/10.3390/fluids10020041

4. Numerical Mixing Index: Definition and Application on Concrete Mixer

数值混合指数的定义及其在混凝土搅拌机中的应用研究

https://doi.org/10.3390/fluids10030072

5. Mitigating Airborne Infection Transmission in the Common Area of Inpatient Wards—A Case Study

住院病房公共区域空气传播感染风险的缓解策略：案例研究

https://doi.org/10.3390/fluids10100267

6. Physics-Informed Neural Networks Simulation and Validation of Airflows in Three-Dimensional Upper Respiratory Tracts

三维上呼吸道内气流的物理信息神经网络模拟与验证

https://doi.org/10.3390/fluids10120306

7. CFD-Based Hydraulic Performance Improvement of a Chlorine Contact Tank: The Case Study of a Southern Italy Plant

基于 CFD 的氯接触池水力性能优化研究：以意大利南部某一水厂为例

https://doi.org/10.3390/fluids10120328

涡动力学与流动稳定性：

1. Linear Stability Analysis on Flow-Induced Vibration of an Elastically Mounted Rotating Cylinder

弹性支撑旋转圆柱流体诱导振动的线性稳定性分析

https://doi.org/10.3390/fluids10030056

2. Influence of Boundary Conditions and Heating Modes on the Onset of Columnar Convection in Rotating Spherical Shells

边界条件与加热模式对旋转球壳中柱状对流激发起性的影响

https://doi.org/10.3390/fluids10090237

3. Vortex Dynamics Effects on the Development of a Confined Turbulent Wake

涡动力学效应对受限湍流尾迹发展的影响

https://doi.org/10.3390/fluids10110283

4. Objective Liutex from Flow Data Measured in a Non-Inertial Frame

非惯性系测量流动数据中的客观 Liutex 矢量

https://doi.org/10.3390/fluids11010004

能源工程与热物理流体力学：

1. Solution Combustion Synthesis for Various Applications: A Review of the Mixed-Fuel Approach

溶液燃烧合成技术在多领域的应用：基于混合燃料策略的研究综述

https://doi.org/10.3390/fluids10040082

2. A Comprehensive Review of Biomass Gasification Characteristics in Fluidized Bed Reactors: Progress, Challenges, and Future Directions

流化床反应器中生物质气化特性的全面综述：进展、挑战与未来方向

https://doi.org/10.3390/fluids10060147

经典流体力学与基础理论：

Slow Translation and Rotation of a Composite Sphere Parallel to One or Two Planar Walls

平行于单/双平面壁运动的复合球体的慢速平移与旋转

https://doi.org/10.3390/fluids10060154

特刊征稿

1. 10th Anniversary of Fluids—Recent Advances in Non-Newtonian and Complex Fluids

Fluids十周年纪念特刊：非牛顿流体与复杂流体最新进展

https://www.mdpi.com/journal/fluids/special_issues/LZU6FB79IS

客座编辑：Prof. Dr. Rajinder Pal (University of Waterloo, Canada)

投稿截止日期：2026年12月31日

2. Multiphase Flow and Fluid Machinery

多相流与流体机械

https://www.mdpi.com/journal/fluids/special_issues/9I7HZLN4I9

客座编辑：Dr. Ming Liu (The University of Tokyo, Japan), Dr. Yadong Han (University of Oxford, UK)

投稿截止日期：2026年12月31日

3. Classical and AI Computational Fluid Dynamics: Research and Applications to Science and Engineering

https://www.mdpi.com/journal/fluids/special_issues/7YK976VY7C

客座编辑：Prof. Dr. Jaime Klapp (Instituto Nacional de Investigaciones Nucleares, Mexico),

Prof. Dr. Leonardo Di G. Sigalotti (Autonomous University-Azcapotzalco (UAM-A), Mexico), Prof. Dr. J. E. V. Guzmán (Universidad Nacional Autónoma de México (UNAM), Mexico), Dr. Estela Mayoral (Instituto Nacional de Investigaciones Nucleares, Mexico)

投稿截止日期：2027年1月31日

期刊简介

Fluids (ISSN 2311-5521) 创刊于2016年，是一个国际同行评审的开放获取期刊。期刊涵盖流体及其应用的各个方面，聚焦数学与计算流体力学、非牛顿流体与复杂流体、多相流与颗粒材料、地球物理与环境流体力学、传热传质以及湍流等关键领域。目前，Fluids 期刊已被Scopus、ESCI (Web of Science)、EBSCO 等数据库收录。

联系期刊编辑部: fluids@mdpi.com

进入期刊主页: https://www.mdpi.com/journal/fluids

了解投稿指南: https://www.mdpi.com/journal/fluids/instructions